§ 52-157. Curb and gutter.

(a)

Wherever a proposed subdivision lies adjacent to or between other subdivisions which have been provided with curb and gutter, and whenever the proposed subdivision will average more than three lots per gross acre included in the subdivision, the subdivider shall install curb and gutter on each side of the street surface.

(b)

The curb and gutter shall be of the construction type as shown in Figure 1, and shall be constructed according to the following specifications:

(1)

The base for the curb and utter shall be well compacted on the existing base or grade.

(2)

The minimum specifications shall be as shown for the type of cross-section in Figure 1.

(3)

All concrete used in the curb and gutter shall meet the specifications of the state department of transportation.

(c)

Integral or monolithic curb of the same dimensions as shown in Figure 1, may be built on concrete pavement, provided, the pavement widths as set out elsewhere in these regulations are maintained.

(Ord. of 12-3-1973, tit. II, art. 4, § 6)